Auto merge of #36595 - bluss:hashmap-usize-for-hash, r=alexcrichton

hashmap: Store hashes as usize internally

We can't use more than usize's bits of a hash to select a bucket anyway,
so we only need to store that part in the table. This should be an
improvement for the size of the data structure on 32-bit platforms.
Smaller data means better cache utilization and hopefully better
performance.

Fixes #36567
This commit is contained in:
bors 2016-10-31 21:36:39 -07:00 committed by GitHub
commit 265ab659b2

View file

@ -21,7 +21,18 @@ use ptr::{self, Unique, Shared};
use self::BucketState::*;
const EMPTY_BUCKET: u64 = 0;
/// Integer type used for stored hash values.
///
/// No more than bit_width(usize) bits are needed to select a bucket.
///
/// The most significant bit is ours to use for tagging `SafeHash`.
///
/// (Even if we could have usize::MAX bytes allocated for buckets,
/// each bucket stores at least a `HashUint`, so there can be no more than
/// usize::MAX / size_of(usize) buckets.)
type HashUint = usize;
const EMPTY_BUCKET: HashUint = 0;
/// The raw hashtable, providing safe-ish access to the unzipped and highly
/// optimized arrays of hashes, and key-value pairs.
@ -64,7 +75,7 @@ const EMPTY_BUCKET: u64 = 0;
pub struct RawTable<K, V> {
capacity: usize,
size: usize,
hashes: Unique<u64>,
hashes: Unique<HashUint>,
// Because K/V do not appear directly in any of the types in the struct,
// inform rustc that in fact instances of K and V are reachable from here.
@ -75,7 +86,7 @@ unsafe impl<K: Send, V: Send> Send for RawTable<K, V> {}
unsafe impl<K: Sync, V: Sync> Sync for RawTable<K, V> {}
struct RawBucket<K, V> {
hash: *mut u64,
hash: *mut HashUint,
// We use *const to ensure covariance with respect to K and V
pair: *const (K, V),
_marker: marker::PhantomData<(K, V)>,
@ -136,15 +147,27 @@ pub struct GapThenFull<K, V, M> {
/// buckets.
#[derive(PartialEq, Copy, Clone)]
pub struct SafeHash {
hash: u64,
hash: HashUint,
}
impl SafeHash {
/// Peek at the hash value, which is guaranteed to be non-zero.
#[inline(always)]
pub fn inspect(&self) -> u64 {
pub fn inspect(&self) -> HashUint {
self.hash
}
#[inline(always)]
pub fn new(hash: u64) -> Self {
// We need to avoid 0 in order to prevent collisions with
// EMPTY_HASH. We can maintain our precious uniform distribution
// of initial indexes by unconditionally setting the MSB,
// effectively reducing the hashes by one bit.
//
// Truncate hash to fit in `HashUint`.
let hash_bits = size_of::<HashUint>() * 8;
SafeHash { hash: (1 << (hash_bits - 1)) | (hash as HashUint) }
}
}
/// We need to remove hashes of 0. That's reserved for empty buckets.
@ -156,25 +179,21 @@ pub fn make_hash<T: ?Sized, S>(hash_state: &S, t: &T) -> SafeHash
{
let mut state = hash_state.build_hasher();
t.hash(&mut state);
// We need to avoid 0 in order to prevent collisions with
// EMPTY_HASH. We can maintain our precious uniform distribution
// of initial indexes by unconditionally setting the MSB,
// effectively reducing 64-bits hashes to 63 bits.
SafeHash { hash: 0x8000_0000_0000_0000 | state.finish() }
SafeHash::new(state.finish())
}
// `replace` casts a `*u64` to a `*SafeHash`. Since we statically
// `replace` casts a `*HashUint` to a `*SafeHash`. Since we statically
// ensure that a `FullBucket` points to an index with a non-zero hash,
// and a `SafeHash` is just a `u64` with a different name, this is
// and a `SafeHash` is just a `HashUint` with a different name, this is
// safe.
//
// This test ensures that a `SafeHash` really IS the same size as a
// `u64`. If you need to change the size of `SafeHash` (and
// `HashUint`. If you need to change the size of `SafeHash` (and
// consequently made this test fail), `replace` needs to be
// modified to no longer assume this.
#[test]
fn can_alias_safehash_as_u64() {
assert_eq!(size_of::<SafeHash>(), size_of::<u64>())
fn can_alias_safehash_as_hash() {
assert_eq!(size_of::<SafeHash>(), size_of::<HashUint>())
}
impl<K, V> RawBucket<K, V> {
@ -605,14 +624,14 @@ impl<K, V> RawTable<K, V> {
return RawTable {
size: 0,
capacity: 0,
hashes: Unique::new(EMPTY as *mut u64),
hashes: Unique::new(EMPTY as *mut HashUint),
marker: marker::PhantomData,
};
}
// No need for `checked_mul` before a more restrictive check performed
// later in this method.
let hashes_size = capacity.wrapping_mul(size_of::<u64>());
let hashes_size = capacity.wrapping_mul(size_of::<HashUint>());
let pairs_size = capacity.wrapping_mul(size_of::<(K, V)>());
// Allocating hashmaps is a little tricky. We need to allocate two
@ -624,13 +643,13 @@ impl<K, V> RawTable<K, V> {
// right is a little subtle. Therefore, calculating offsets has been
// factored out into a different function.
let (alignment, hash_offset, size, oflo) = calculate_allocation(hashes_size,
align_of::<u64>(),
align_of::<HashUint>(),
pairs_size,
align_of::<(K, V)>());
assert!(!oflo, "capacity overflow");
// One check for overflow that covers calculation and rounding of size.
let size_of_bucket = size_of::<u64>().checked_add(size_of::<(K, V)>()).unwrap();
let size_of_bucket = size_of::<HashUint>().checked_add(size_of::<(K, V)>()).unwrap();
assert!(size >=
capacity.checked_mul(size_of_bucket)
.expect("capacity overflow"),
@ -641,7 +660,7 @@ impl<K, V> RawTable<K, V> {
::alloc::oom()
}
let hashes = buffer.offset(hash_offset as isize) as *mut u64;
let hashes = buffer.offset(hash_offset as isize) as *mut HashUint;
RawTable {
capacity: capacity,
@ -652,7 +671,7 @@ impl<K, V> RawTable<K, V> {
}
fn first_bucket_raw(&self) -> RawBucket<K, V> {
let hashes_size = self.capacity * size_of::<u64>();
let hashes_size = self.capacity * size_of::<HashUint>();
let pairs_size = self.capacity * size_of::<(K, V)>();
let buffer = *self.hashes as *mut u8;
@ -756,7 +775,7 @@ impl<K, V> RawTable<K, V> {
/// this interface is safe, it's not used outside this module.
struct RawBuckets<'a, K, V> {
raw: RawBucket<K, V>,
hashes_end: *mut u64,
hashes_end: *mut HashUint,
// Strictly speaking, this should be &'a (K,V), but that would
// require that K:'a, and we often use RawBuckets<'static...> for
@ -802,7 +821,7 @@ impl<'a, K, V> Iterator for RawBuckets<'a, K, V> {
/// the table's remaining entries. It's used in the implementation of Drop.
struct RevMoveBuckets<'a, K, V> {
raw: RawBucket<K, V>,
hashes_end: *mut u64,
hashes_end: *mut HashUint,
elems_left: usize,
// As above, `&'a (K,V)` would seem better, but we often use
@ -1036,10 +1055,10 @@ impl<K, V> Drop for RawTable<K, V> {
}
}
let hashes_size = self.capacity * size_of::<u64>();
let hashes_size = self.capacity * size_of::<HashUint>();
let pairs_size = self.capacity * size_of::<(K, V)>();
let (align, _, size, oflo) = calculate_allocation(hashes_size,
align_of::<u64>(),
align_of::<HashUint>(),
pairs_size,
align_of::<(K, V)>());