Improve the diagnostics for unused generic parameters
* Don't emit two errors (namely E0091 *and* E0392) for unused type parameters on *lazy* type aliases
* Fix the diagnostic help message of E0392 for *lazy* type aliases: Don't talk about the “fields” of lazy type aliases (use the term “body” instead) and don't suggest `PhantomData` for them, it doesn't make much sense
* Consolidate the diagnostics for E0091 (unused type parameters in type aliases) and E0392 (unused generic parameters due to bivariance) and make it translatable
* Still keep the error codes distinct (for now)
* Naturally leads to better diagnostics for E0091
r? ```@oli-obk``` (to ballast your review load :P) or compiler
Expand the primary span of E0277 when the immediate unmet bound is not what the user wrote:
```
error[E0277]: the trait bound `i32: Bar` is not satisfied
--> f100.rs:6:6
|
6 | <i32 as Foo>::foo();
| ^^^ the trait `Bar` is not implemented for `i32`, which is required by `i32: Foo`
|
help: this trait has no implementations, consider adding one
--> f100.rs:2:1
|
2 | trait Bar {}
| ^^^^^^^^^
note: required for `i32` to implement `Foo`
--> f100.rs:3:14
|
3 | impl<T: Bar> Foo for T {}
| --- ^^^ ^
| |
| unsatisfied trait bound introduced here
```
Fix#40120.
remove StructuralEq trait
The documentation given for the trait is outdated: *all* function pointers implement `PartialEq` and `Eq` these days. So the `StructuralEq` trait doesn't really seem to have any reason to exist any more.
One side-effect of this PR is that we allow matching on some consts that do not implement `Eq`. However, we already allowed matching on floats and consts containing floats, so this is not new, it is just allowed in more cases now. IMO it makes no sense at all to allow float matching but also sometimes require an `Eq` instance. If we want to require `Eq` we should adjust https://github.com/rust-lang/rust/pull/115893 to check for `Eq`, and rule out float matching for good.
Fixes https://github.com/rust-lang/rust/issues/115881
never_patterns: Count `!` bindings as diverging
A binding that is a never pattern is not reachable, hence counts as diverging code. This allows in particular `fn foo(!: Void) -> SomeType {}` to typecheck.
r? ``@compiler-errors``
Rollup of 10 pull requests
Successful merges:
- #117910 (Refactor uses of `objc_msgSend` to no longer have clashing definitions)
- #118639 (Undeprecate lint `unstable_features` and make use of it in the compiler)
- #119801 (Fix deallocation with wrong allocator in (A)Rc::from_box_in)
- #120058 (bootstrap: improvements for compiler builds)
- #120059 (Make generic const type mismatches not hide trait impls from the trait solver)
- #120097 (Report unreachable subpatterns consistently)
- #120137 (Validate AggregateKind types in MIR)
- #120164 (`maybe_lint_impl_trait`: separate `is_downgradable` from `is_object_safe`)
- #120181 (Allow any `const` expression blocks in `thread_local!`)
- #120218 (rustfmt: Check that a token can begin a nonterminal kind before parsing it as a macro arg)
r? `@ghost`
`@rustbot` modify labels: rollup
Report unreachable subpatterns consistently
We weren't reporting unreachable subpatterns in function arguments and `let` expressions. This wasn't very important, but never patterns make it more relevant: a user might write `let (Ok(x) | Err(!)) = ...` in a case where `let Ok(x) = ...` is accepted, so we should report the `Err(!)` as redundant.
r? ```@compiler-errors```
never_patterns: typecheck never patterns
This checks that a `!` pattern is only used on an uninhabited type (modulo match ergonomics, i.e. `!` is allowed on `&Void`).
r? `@compiler-errors`
Detect `NulInCStr` error earlier.
By making it an `EscapeError` instead of a `LitError`. This makes it like the other errors produced when checking string literals contents, e.g. for invalid escape sequences or bare CR chars.
NOTE: this means these errors are issued earlier, before expansion, which changes behaviour. It will be possible to move the check back to the later point if desired. If that happens, it's likely that all the string literal contents checks will be delayed together.
One nice thing about this: the old approach had some code in `report_lit_error` to calculate the span of the nul char from a range. This code used a hardwired `+2` to account for the `c"` at the start of a C string literal, but this should have changed to a `+3` for raw C string literals to account for the `cr"`, which meant that the caret in `cr"` nul error messages was one short of where it should have been. The new approach doesn't need any of this and avoids the off-by-one error.
r? ```@fee1-dead```
never patterns: Check bindings wrt never patterns
Never patterns:
- Shouldn't contain bindings since they never match anything;
- Don't count when checking that or-patterns have consistent bindings.
r? `@compiler-errors`
Suggest Upgrading Compiler for Gated Features
This PR addresses #117318
I have a few questions:
1. Do we want to specify the current version and release date of the compiler? I have added this in via environment variables, which I found in the code for the rustc cli where it handles the `--version` flag
a. How can I handle the changing message in the tests?
3. Do we want to only show this message when the compiler is old?
a. How can we determine when the compiler is old?
I'll wait until we figure out the message to bless the tests
By making it an `EscapeError` instead of a `LitError`. This makes it
like the other errors produced when checking string literals contents,
e.g. for invalid escape sequences or bare CR chars.
NOTE: this means these errors are issued earlier, before expansion,
which changes behaviour. It will be possible to move the check back to
the later point if desired. If that happens, it's likely that all the
string literal contents checks will be delayed together.
One nice thing about this: the old approach had some code in
`report_lit_error` to calculate the span of the nul char from a range.
This code used a hardwired `+2` to account for the `c"` at the start of
a C string literal, but this should have changed to a `+3` for raw C
string literals to account for the `cr"`, which meant that the caret in
`cr"` nul error messages was one short of where it should have been. The
new approach doesn't need any of this and avoids the off-by-one error.
Avoid silencing relevant follow-up errors
r? `@matthewjasper`
This PR only adds new errors to tests that are already failing and fixes one ICE.
Several tests were changed to not emit new errors. I believe all of them were faulty tests, and not explicitly testing for the code that had new errors.
never patterns: Document behavior of never patterns with macros-by-example
`never_patterns` makes `!` parse as a pattern so I was worried about breaking macros-by-example matching. Turns out we're fine because the cases that now match `$p:pat` used to error in the past. The only tricky case is `!` by itself, which backwards-compatibly doesn't match `$p:pat`. I have no idea why tho, I didn't think of that when I was implementing parsing 😅.
This adds tests so we don't regress the current behavior.
r? `@compiler-errors`
Fix scoping for let chains in match guards
If let guards were previously represented as a different type of guard in HIR and THIR. This meant that let chains in match guards were not handled correctly because they were treated exactly like normal guards.
- Remove `hir::Guard` and `thir::Guard`.
- Make the scoping different between normal guards and if let guards also check for let chains.
closes#118593
Match guards with an if let guard or an if let chain guard should have a
temporary scope of the whole arm. This is to allow ref bindings to
temporaries to borrow check.
Don't synthesize host effect args inside trait object types
While we were indeed emitting an error for `~const` & `const` trait bounds in trait object types, we were still synthesizing host effect args for them.
Since we don't record the original trait bound modifiers for dyn-Trait in `hir::TyKind::TraitObject` (unlike we do for let's say impl-Trait, `hir::TyKind::OpaqueTy`), AstConv just assumes `ty::BoundConstness::NotConst` in `conv_object_ty_poly_trait_ref` which given `<host> dyn ~const NonConstTrait` resulted in us not realizing that `~const` was used on a non-const trait which lead to a failed assertion in the end.
Instead of updating `hir::TyKind::TraitObject` to track this kind of information, just strip the user-provided constness (similar to #119505).
Fixes#119524.
