misc cleanups from debugging something
rename `instantiate_canonical_with_fresh_inference_vars` to `instantiate_canonical` the substs for the canonical are not solely infer vars as that would be wildly wrong and it is rather confusing to see this method called and think that the entire canonicalization setup is completely broken when it is not 👍
also update region debug printing to be more like the custom impls for Ty/Const, right now regions in debug output are horribly verbose and make it incredibly hard to read but with this atleast boundvars and placeholders when debugging the new solver do not take up excessive amounts of space.
r? `@lcnr`
Stabilize associated type bounds (RFC 2289)
This PR stabilizes associated type bounds, which were laid out in [RFC 2289]. This gives us a shorthand to express nested type bounds that would otherwise need to be expressed with nested `impl Trait` or broken into several `where` clauses.
### What are we stabilizing?
We're stabilizing the associated item bounds syntax, which allows us to put bounds in associated type position within other bounds, i.e. `T: Trait<Assoc: Bounds...>`. See [RFC 2289] for motivation.
In all position, the associated type bound syntax expands into a set of two (or more) bounds, and never anything else (see "How does this differ[...]" section for more info).
Associated type bounds are stabilized in four positions:
* **`where` clauses (and APIT)** - This is equivalent to breaking up the bound into two (or more) `where` clauses. For example, `where T: Trait<Assoc: Bound>` is equivalent to `where T: Trait, <T as Trait>::Assoc: Bound`.
* **Supertraits** - Similar to above, `trait CopyIterator: Iterator<Item: Copy> {}`. This is almost equivalent to breaking up the bound into two (or more) `where` clauses; however, the bound on the associated item is implied whenever the trait is used. See #112573/#112629.
* **Associated type item bounds** - This allows constraining the *nested* rigid projections that are associated with a trait's associated types. e.g. `trait Trait { type Assoc: Trait2<Assoc2: Copy>; }`.
* **opaque item bounds (RPIT, TAIT)** - This allows constraining associated types that are associated with the opaque without having to *name* the opaque. For example, `impl Iterator<Item: Copy>` defines an iterator whose item is `Copy` without having to actually name that item bound.
The latter three are not expressible in surface Rust (though for associated type item bounds, this will change in #120752, which I don't believe should block this PR), so this does represent a slight expansion of what can be expressed in trait bounds.
### How does this differ from the RFC?
Compared to the RFC, the current implementation *always* desugars associated type bounds to sets of `ty::Clause`s internally. Specifically, it does *not* introduce a position-dependent desugaring as laid out in [RFC 2289], and in particular:
* It does *not* desugar to anonymous associated items in associated type item bounds.
* It does *not* desugar to nested RPITs in RPIT bounds, nor nested TAITs in TAIT bounds.
This position-dependent desugaring laid out in the RFC existed simply to side-step limitations of the trait solver, which have mostly been fixed in #120584. The desugaring laid out in the RFC also added unnecessary complication to the design of the feature, and introduces its own limitations to, for example:
* Conditionally lowering to nested `impl Trait` in certain positions such as RPIT and TAIT means that we inherit the limitations of RPIT/TAIT, namely lack of support for higher-ranked opaque inference. See this code example: https://github.com/rust-lang/rust/pull/120752#issuecomment-1979412531.
* Introducing anonymous associated types makes traits no longer object safe, since anonymous associated types are not nameable, and all associated types must be named in `dyn` types.
This last point motivates why this PR is *not* stabilizing support for associated type bounds in `dyn` types, e.g, `dyn Assoc<Item: Bound>`. Why? Because `dyn` types need to have *concrete* types for all associated items, this would necessitate a distinct lowering for associated type bounds, which seems both complicated and unnecessary compared to just requiring the user to write `impl Trait` themselves. See #120719.
### Implementation history:
Limited to the significant behavioral changes and fixes and relevant PRs, ping me if I left something out--
* #57428
* #108063
* #110512
* #112629
* #120719
* #120584Closes#52662
[RFC 2289]: https://rust-lang.github.io/rfcs/2289-associated-type-bounds.html
Provide structured suggestion for `#![feature(foo)]`
```
error: `S2<'_>` is forbidden as the type of a const generic parameter
--> $DIR/lifetime-in-const-param.rs:5:23
|
LL | struct S<'a, const N: S2>(&'a ());
| ^^
|
= note: the only supported types are integers, `bool` and `char`
help: add `#![feature(adt_const_params)]` to the crate attributes to enable more complex and user defined types
|
LL + #![feature(adt_const_params)]
|
```
Fix#55941.
```
error: `S2<'_>` is forbidden as the type of a const generic parameter
--> $DIR/lifetime-in-const-param.rs:5:23
|
LL | struct S<'a, const N: S2>(&'a ());
| ^^
|
= note: the only supported types are integers, `bool` and `char`
help: add `#![feature(adt_const_params)]` to the crate attributes to enable more complex and user defined types
|
LL + #![feature(adt_const_params)]
|
```
Fix#55941.
Split refining_impl_trait lint into _reachable, _internal variants
As discussed in https://github.com/rust-lang/rust/issues/119535#issuecomment-1909352040:
> We discussed this today in triage and developed a consensus to:
>
> * Add a separate lint against impls that refine a return type defined with RPITIT even when the trait is not crate public.
> * Place that in a lint group along with the analogous crate public lint.
> * Create an issue to solicit feedback on these lints (or perhaps two separate ones).
> * Have the warnings displayed with each lint reference this issue in a similar manner to how we do that today with the required `Self: '0'` bound on GATs.
> * Make a note to review this feedback on 2-3 release cycles.
This points users to https://github.com/rust-lang/rust/issues/121718 to leave feedback.
Consolidate WF for aliases
Make RPITs/TAITs/weak (type) aliases/projections all enforce:
1. their nominal predicates
2. their args are WF
This possibly does extra work, but is also nice for consistency sake.
r? lcnr
Make `DefiningAnchor::Bind` only store the opaque types that may be constrained, instead of the current infcx root item.
This makes `Bind` almost always be empty, so we can start forwarding it to queries, allowing us to remove `Bubble` entirely (not done in this PR)
The only behaviour change is in diagnostics.
r? `@lcnr` `@compiler-errors`
Don't ICE if we collect no RPITITs unless there are no unification errors
Move an assertion in `collect_return_position_impl_trait_in_trait_tys` to after the `ObligationCtxt::eq` calls, so that we only assert and ICE if we have unification errors.
Fixes#121468
Uplift some feeding out of `associated_type_for_impl_trait_in_impl` and into queries
This PR moves the `type_of` and `generics_of` query feeding out of `associated_type_for_impl_trait_in_impl`, since eagerly feeding results in query cycles due to a subtle interaction with `resolve_bound_vars`.
Fixes#122019
r? spastorino
stricter hidden type wf-check [based on #115008]
Original work by `@aliemjay` in #115008. A huge thanks to them for originally figuring out this approach ❤️
Fixes https://github.com/rust-lang/rust/issues/114728
Fixes https://github.com/rust-lang/rust/issues/114572
Instead of adding the `WellFormed` obligations when relating opaque types, we now always emit such an obligation when defining the hidden type.
This causes nested opaque types which aren't wf to error, see the comment below for the described impact. I believe this change to be desirable as it significantly reduces complexity by removing special-cases.
It also caused an issue with RPITIT: in defaulted trait methods, we add a `Projection(synthetic_assoc, rpit_of_trait_method)` clause to the `param_env`. This clause is not added to the `ParamEnv` of the nested coroutines. This caused a normalization failure in `fn check_coroutine_obligations` with the new solver. I fixed that by using the env of the typeck root instead.
r? `@oli-obk`
When encountering trait bound errors that satisfy some heuristics that
tell us that the relevant trait for the user comes from the root
obligation and not the current obligation, we use the root predicate for
the main message.
This allows to talk about "X doesn't implement Pattern<'_>" over the
most specific case that just happened to fail, like "char doesn't
implement Fn(&mut char)" in
`tests/ui/traits/suggest-dereferences/root-obligation.rs`
The heuristics are:
- the type of the leaf predicate is (roughly) the same as the type
from the root predicate, as a proxy for "we care about the root"
- the leaf trait and the root trait are different, so as to avoid
talking about `&mut T: Trait` and instead remain talking about
`T: Trait` instead
- the root trait is not `Unsize`, as to avoid talking about it in
`tests/ui/coercion/coerce-issue-49593-box-never.rs`.
```
error[E0277]: the trait bound `&char: Pattern<'_>` is not satisfied
--> $DIR/root-obligation.rs:6:38
|
LL | .filter(|c| "aeiou".contains(c))
| -------- ^ the trait `Fn<(char,)>` is not implemented for `&char`, which is required by `&char: Pattern<'_>`
| |
| required by a bound introduced by this call
|
= note: required for `&char` to implement `FnOnce<(char,)>`
= note: required for `&char` to implement `Pattern<'_>`
note: required by a bound in `core::str::<impl str>::contains`
--> $SRC_DIR/core/src/str/mod.rs:LL:COL
help: consider dereferencing here
|
LL | .filter(|c| "aeiou".contains(*c))
| +
```
Fix#79359, fix#119983, fix#118779, cc #118415 (the suggestion needs
to change).
Now that inlining, mir validation and const eval all use reveal-all, we won't be constraining hidden types here anymore
r? `@compiler-errors`
one bubble down, two more to go
the test is unrelated, just something I noticed would be good to test in both the old solver and the new.
Count stashed errors again
Stashed diagnostics are such a pain. Their "might be emitted, might not" semantics messes with lots of things.
#120828 and #121206 made some big changes to how they work, improving some things, but still leaving some problems, as seen by the issues caused by #121206. This PR aims to fix all of them by restricting them in a way that eliminates the "might be emitted, might not" semantics while still allowing 98% of their benefit. Details in the individual commit logs.
r? `@oli-obk`
Deeply normalize obligations in `refining_impl_trait`
We somewhat awkwardly use semantic comparison when checking the `refining_impl_trait` lint. This relies on us being able to normalize bounds eagerly to avoid cases where an unnormalized alias is not considered equal to a normalized alias. Since `normalize` in the new solver is a noop, let's use `deeply_normalize` instead.
r? lcnr
cc ``@tmandry,`` this should fix your bug lol
Stashed errors used to be counted as errors, but could then be
cancelled, leading to `ErrorGuaranteed` soundness holes. #120828 changed
that, closing the soundness hole. But it introduced other difficulties
because you sometimes have to account for pending stashed errors when
making decisions about whether errors have occured/will occur and it's
easy to overlook these.
This commit aims for a middle ground.
- Stashed errors (not warnings) are counted immediately as emitted
errors, avoiding the possibility of forgetting to consider them.
- The ability to cancel (or downgrade) stashed errors is eliminated, by
disallowing the use of `steal_diagnostic` with errors, and introducing
the more restrictive methods `try_steal_{modify,replace}_and_emit_err`
that can be used instead.
Other things:
- `DiagnosticBuilder::stash` and `DiagCtxt::stash_diagnostic` now both
return `Option<ErrorGuaranteed>`, which enables the removal of two
`delayed_bug` calls and one `Ty::new_error_with_message` call. This is
possible because we store error guarantees in
`DiagCtxt::stashed_diagnostics`.
- Storing the guarantees also saves us having to maintain a counter.
- Calls to the `stashed_err_count` method are no longer necessary
alongside calls to `has_errors`, which is a nice simplification, and
eliminates two more `span_delayed_bug` calls and one FIXME comment.
- Tests are added for three of the four fixed PRs mentioned below.
- `issue-121108.rs`'s output improved slightly, omitting a non-useful
error message.
Fixes#121451.
Fixes#121477.
Fixes#121504.
Fixes#121508.
Account for RPITIT in E0310 explicit lifetime constraint suggestion
When given
```rust
trait Original {
fn f() -> impl Fn();
}
trait Erased {
fn f(&self) -> Box<dyn Fn()>;
}
impl<T: Original> Erased for T {
fn f(&self) -> Box<dyn Fn()> {
Box::new(<T as Original>::f())
}
}
```
emit do not emit an invalid suggestion restricting the `Trait::{opaque}` type in a `where` clause:
```
error[E0310]: the associated type `<T as Original>::{opaque#0}` may not live long enough
--> $DIR/missing-static-bound-from-impl.rs:11:9
|
LL | Box::new(<T as Original>::f())
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
| |
| the associated type `<T as Original>::{opaque#0}` must be valid for the static lifetime...
| ...so that the type `impl Fn()` will meet its required lifetime bounds
```
Partially address #119773. Ideally we'd suggest modifying `Erased::f` instead.
r? `@compiler-errors`
Fix more #121208 fallout
#121208 converted lots of delayed bugs to bugs. Unsurprisingly, there were a few invalid conversion found via fuzzing.
r? `@lcnr`
Provide suggestions through `rustc_confusables` annotations
Help with common API confusion, like asking for `push` when the data structure really has `append`.
```
error[E0599]: no method named `size` found for struct `Vec<{integer}>` in the current scope
--> $DIR/rustc_confusables_std_cases.rs:17:7
|
LL | x.size();
| ^^^^
|
help: you might have meant to use `len`
|
LL | x.len();
| ~~~
help: there is a method with a similar name
|
LL | x.resize();
| ~~~~~~
```
Fix#59450 (we can open subsequent tickets for specific cases).
Fix#108437:
```
error[E0599]: `Option<{integer}>` is not an iterator
--> f101.rs:3:9
|
3 | opt.flat_map(|val| Some(val));
| ^^^^^^^^ `Option<{integer}>` is not an iterator
|
::: /home/gh-estebank/rust/library/core/src/option.rs:571:1
|
571 | pub enum Option<T> {
| ------------------ doesn't satisfy `Option<{integer}>: Iterator`
|
= note: the following trait bounds were not satisfied:
`Option<{integer}>: Iterator`
which is required by `&mut Option<{integer}>: Iterator`
help: you might have meant to use `and_then`
|
3 | opt.and_then(|val| Some(val));
| ~~~~~~~~
```
On type error of method call arguments, look at confusables for suggestion. Fix#87212:
```
error[E0308]: mismatched types
--> f101.rs:8:18
|
8 | stuff.append(Thing);
| ------ ^^^^^ expected `&mut Vec<Thing>`, found `Thing`
| |
| arguments to this method are incorrect
|
= note: expected mutable reference `&mut Vec<Thing>`
found struct `Thing`
note: method defined here
--> /home/gh-estebank/rust/library/alloc/src/vec/mod.rs:2025:12
|
2025 | pub fn append(&mut self, other: &mut Self) {
| ^^^^^^
help: you might have meant to use `push`
|
8 | stuff.push(Thing);
| ~~~~
```
When given
```rust
trait Original {
fn f() -> impl Fn();
}
trait Erased {
fn f(&self) -> Box<dyn Fn()>;
}
impl<T: Original> Erased for T {
fn f(&self) -> Box<dyn Fn()> {
Box::new(<T as Original>::f())
}
}
```
avoid suggestion to restrict the `Trait::{opaque}` type in a `where` clause:
```
error[E0310]: the associated type `<T as Original>::{opaque#0}` may not live long enough
--> $DIR/missing-static-bound-from-impl.rs:11:9
|
LL | Box::new(<T as Original>::f())
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
| |
| the associated type `<T as Original>::{opaque#0}` must be valid for the static lifetime...
| ...so that the type `impl Fn()` will meet its required lifetime bounds
```
CC #119773.
