Rollup of 7 pull requests
Successful merges:
- #121533 (Handle .init_array link_section specially on wasm)
- #127825 (Migrate `macos-fat-archive`, `manual-link` and `archive-duplicate-names` `run-make` tests to rmake)
- #127891 (Tweak suggestions when using incorrect type of enum literal)
- #127902 (`collect_tokens_trailing_token` cleanups)
- #127928 (Migrate `lto-smoke-c` and `link-path-order` `run-make` tests to rmake)
- #127935 (Change `binary_asm_labels` to only fire on x86 and x86_64)
- #127953 ([compiletest] Search *.a when getting dynamic libraries on AIX)
r? `@ghost`
`@rustbot` modify labels: rollup
Represent type-level consts with new-and-improved `hir::ConstArg`
### Summary
This is a step toward `min_generic_const_exprs`. We now represent all const
generic arguments using an enum that differentiates between const *paths*
(temporarily just bare const params) and arbitrary anon consts that may perform
computations. This will enable us to cleanly implement the `min_generic_const_args`
plan of allowing the use of generics in paths used as const args, while
disallowing their use in arbitrary anon consts. Here is a summary of the salient
aspects of this change:
- Add `current_def_id_parent` to `LoweringContext`
This is needed to track anon const parents properly once we implement
`ConstArgKind::Path` (which requires moving anon const def-creation
outside of `DefCollector`).
- Create `hir::ConstArgKind` enum with `Path` and `Anon` variants. Use it in the
existing `hir::ConstArg` struct, replacing the previous `hir::AnonConst` field.
- Use `ConstArg` for all instances of const args. Specifically, use it instead
of `AnonConst` for assoc item constraints, array lengths, and const param
defaults.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at https://github.com/rust-lang/rust/issues/127009.
### Followup items post-merge
- Use `ConstArgKind::Path` for all const paths, not just const params.
- Fix (no github dont close this issue) #127009
- If a path in generic args doesn't resolve as a type, try to resolve as a const
instead (do this in rustc_resolve). Then remove the special-casing from
`rustc_ast_lowering`, so that all params will automatically be lowered as
`ConstArgKind::Path`.
- (?) Consider making `const_evaluatable_unchecked` a hard error, or at least
trying it in crater
r? `@BoxyUwU`
Change `binary_asm_labels` to only fire on x86 and x86_64
In <https://github.com/rust-lang/rust/pull/126922>, the `binary_asm_labels` lint was added which flags labels such as `0:` and `1:`. Before that change, LLVM was giving a confusing error on x86/x86_64 because of an incorrect interpretation.
However, targets other than x86 and x86_64 never had the error message and have not been a problem. This means that the lint was causing code that previously worked to start failing (e.g. `compiler_builtins`), rather than only providing a more clear messages where there has always been an error.
Adjust the lint to only fire on x86 and x86_64 assembly to avoid this regression.
Also update the help message.
Fixes: https://github.com/rust-lang/rust/issues/127821
`collect_tokens_trailing_token` cleanups
More cleanups I made while understanding the code for processing `cfg_attr`, to fix test failures in #124141.
r? `@petrochenkov`
Tweak suggestions when using incorrect type of enum literal
More accurate suggestions when writing wrong style of enum variant literal:
```
error[E0533]: expected value, found struct variant `E::Empty3`
--> $DIR/empty-struct-braces-expr.rs:18:14
|
LL | let e3 = E::Empty3;
| ^^^^^^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | let e3 = E::Empty3 {};
| ++
```
```
error[E0533]: expected value, found struct variant `E::V`
--> $DIR/struct-literal-variant-in-if.rs:10:13
|
LL | if x == E::V { field } {}
| ^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | if x == (E::V { field }) {}
| + +
```
```
error[E0618]: expected function, found enum variant `Enum::Unit`
--> $DIR/suggestion-highlights.rs:15:5
|
LL | Unit,
| ---- enum variant `Enum::Unit` defined here
...
LL | Enum::Unit();
| ^^^^^^^^^^--
| |
| call expression requires function
|
help: `Enum::Unit` is a unit enum variant, and does not take parentheses to be constructed
|
LL - Enum::Unit();
LL + Enum::Unit;
|
```
```
error[E0599]: no variant or associated item named `tuple` found for enum `Enum` in the current scope
--> $DIR/suggestion-highlights.rs:36:11
|
LL | enum Enum {
| --------- variant or associated item `tuple` not found for this enum
...
LL | Enum::tuple;
| ^^^^^ variant or associated item not found in `Enum`
|
help: there is a variant with a similar name
|
LL | Enum::Tuple(/* i32 */);
| ~~~~~~~~~~~~~~~~;
|
```
Tweak "field not found" suggestion when giving struct literal for tuple struct type:
```
error[E0560]: struct `S` has no field named `x`
--> $DIR/nested-non-tuple-tuple-struct.rs:8:19
|
LL | pub struct S(f32, f32);
| - `S` defined here
...
LL | let _x = (S { x: 1.0, y: 2.0 }, S { x: 3.0, y: 4.0 });
| ^ field does not exist
|
help: `S` is a tuple struct, use the appropriate syntax
|
LL | let _x = (S(/* f32 */, /* f32 */), S { x: 3.0, y: 4.0 });
| ~~~~~~~~~~~~~~~~~~~~~~~
Handle .init_array link_section specially on wasm
Given that wasm-ld now has support for [.init_array](8f2bd8ae68/llvm/lib/MC/WasmObjectWriter.cpp (L1852)), it appears we can easily implement that section by falling through to the normal path rather than taking the typical custom_section path for wasm.
The wasm-ld appears to have a bunch of limitations. Only one static with the `link_section` in a crate or else you hit the fatal error in the link above "only one .init_array section fragment supported". They do not get merged.
You can still call multiple constructors by setting it to an array.
```
unsafe extern "C" fn ctor() {
println!("foo");
}
#[used]
#[link_section = ".init_array"]
static FOO: [unsafe extern "C" fn(); 2] = [ctor, ctor];
```
Another issue appears to be that if crate *A* depends on crate *B*, but *A* doesn't call any symbols from *B* and *B* doesn't `#[export_name = ...]` any symbols, then crate *B*'s constructor will not be called. The workaround to this is to provide an exported symbol in crate *B*.
Adding details, clarifying lots of little things, etc. In particular,
the commit adds details of an example. I find this very helpful, because
it's taken me a long time to understand how this code works.
Currently in `collect_tokens_trailing_token`, `start_pos` and `end_pos`
are 1-indexed by `replace_ranges` is 0-indexed, which is really
confusing. Making them both 0-indexed makes debugging much easier.
The `Option`s within the `ReplaceRange`s within the hashmap are always
`None`. This PR omits them and inserts them when they are extracted from
the hashmap.
Rollup of 8 pull requests
Successful merges:
- #127418 (Wrap too long type name)
- #127594 (Fuchsia status code match arm)
- #127835 (Fix ICE in suggestion caused by `⩵` being recovered as `==`)
- #127858 (match lowering: Rename `MatchPair` to `MatchPairTree`)
- #127871 (Mention that type parameters are used recursively on bivariance error)
- #127913 (remove `debug-logging` default from tools profile)
- #127925 (Remove tag field from `Relation`s)
- #127929 (Use more accurate span for `addr_of!` suggestion)
r? `@ghost`
`@rustbot` modify labels: rollup
Use more accurate span for `addr_of!` suggestion
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
Remove tag field from `Relation`s
Can just use the relation name w/ `std::any::type_name`. Also changes some printing to use instrument. Also changes some instrument levels to `trace` since I expect relations are somewhat hot, so having them print on debug is probably noisy.
r? lcnr
remove `debug-logging` default from tools profile
`debug-logging` conflicts with `download-rustc` option, and doesn't really make sense to enable it for a profile that is used for tool development.
Mention that type parameters are used recursively on bivariance error
Right now when a type parameter is used recursively, even with indirection (so it has a finite size) we say that the type parameter is unused:
```
struct B<T>(Box<B<T>>);
```
This is confusing, because the type parameter is *used*, it just doesn't have its variance constrained. This PR tweaks that message to mention that it must be used *non-recursively*.
Not sure if we should actually mention "variance" here, but also I'd somewhat prefer we don't keep the power users in the dark w.r.t the real underlying issue, which is that the variance isn't constrained. That technical detail is reserved for a note, though.
cc `@fee1-dead`
Fixes#118976Fixes#26283Fixes#53191Fixes#105740Fixes#110466
match lowering: Rename `MatchPair` to `MatchPairTree`
In #120904, `MatchPair` became able to store other match pairs as children, forming a tree. That has made the old name confusing, so this patch renames the type to `MatchPairTree`.
This PR also includes a patch renaming the `test` method to `pick_test_for_match_pair`, since it would conflict with the main change.
r? `@Nadrieril`
Fix ICE in suggestion caused by `⩵` being recovered as `==`
The second suggestion shown here would previously incorrectly assume that the span corresponding to `⩵` was 2 bytes wide composed by 2 1 byte wide chars, so a span pointing at `==` could point only at one of the `=` to remove it. Instead, we now replace the whole thing (as we should have the whole time):
```
error: unknown start of token: \u{2a75}
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: Unicode character '⩵' (Two Consecutive Equals Signs) looks like '==' (Double Equals Sign), but it is not
|
LL | const A: usize == 2;
| ~~
error: unexpected `==`
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: try using `=` instead
|
LL | const A: usize = 2;
| ~
```
Fix#127823.
Fuchsia status code match arm
Adds a match arm for the Fuchsia status code upon a process abort. An additional change moves the Windows status code down into the match arm itself instead of being defined as a constant elsewhere.
r? tmandry
The link pointed to a closed issue. Create a new one and point the link
to it.
Also add a help message to hint what change the user could make.
Fixes: https://github.com/rust-lang/rust/issues/127821
In <https://github.com/rust-lang/rust/pull/126922>, the
`binary_asm_labels` lint was added which flags labels such as `0:` and
`1:`. Before that change, LLVM was giving a confusing error on
x86/x86_64 because of an incorrect interpretation.
However, targets other than x86 and x86_64 never had the error message
and have not been a problem. This means that the lint was causing code
that previously worked to start failing (e.g. `compiler_builtins`),
rather than only providing a more clear messages where there has always
been an error.
Adjust the lint to only fire on x86 and x86_64 assembly to avoid this
regression.
Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
```
error[E0560]: struct `S` has no field named `x`
--> $DIR/nested-non-tuple-tuple-struct.rs:8:19
|
LL | pub struct S(f32, f32);
| - `S` defined here
...
LL | let _x = (S { x: 1.0, y: 2.0 }, S { x: 3.0, y: 4.0 });
| ^ field does not exist
|
help: `S` is a tuple struct, use the appropriate syntax
|
LL | let _x = (S(/* f32 */, /* f32 */), S { x: 3.0, y: 4.0 });
| ~~~~~~~~~~~~~~~~~~~~~~~
```
```
error[E0533]: expected value, found struct variant `E::Empty3`
--> $DIR/empty-struct-braces-expr.rs:18:14
|
LL | let e3 = E::Empty3;
| ^^^^^^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | let e3 = E::Empty3 {};
| ++
```
```
error[E0533]: expected value, found struct variant `E::V`
--> $DIR/struct-literal-variant-in-if.rs:10:13
|
LL | if x == E::V { field } {}
| ^^^^ not a value
|
help: you might have meant to create a new value of the struct
|
LL | if x == (E::V { field }) {}
| + +
```
```
error[E0618]: expected function, found enum variant `Enum::Unit`
--> $DIR/suggestion-highlights.rs:15:5
|
LL | Unit,
| ---- enum variant `Enum::Unit` defined here
...
LL | Enum::Unit();
| ^^^^^^^^^^--
| |
| call expression requires function
|
help: `Enum::Unit` is a unit enum variant, and does not take parentheses to be constructed
|
LL - Enum::Unit();
LL + Enum::Unit;
|
```
```
error[E0599]: no variant or associated item named `tuple` found for enum `Enum` in the current scope
--> $DIR/suggestion-highlights.rs:36:11
|
LL | enum Enum {
| --------- variant or associated item `tuple` not found for this enum
...
LL | Enum::tuple;
| ^^^^^ variant or associated item not found in `Enum`
|
help: there is a variant with a similar name
|
LL | Enum::Tuple(/* i32 */);
| ~~~~~~~~~~~~~~~~;
|
```
Rollup of 6 pull requests
Successful merges:
- #124881 (Use ThreadId instead of TLS-address in `ReentrantLock`)
- #127656 (make pub_use_of_private_extern_crate show up in cargo's future breakage reports)
- #127748 (Use Option's discriminant as its size hint)
- #127854 (Add internal lint for detecting non-glob imports of `rustc_type_ir::inherent`)
- #127908 (Update extern linking documentation)
- #127919 (Allow a git command for getting the current branch in bootstrap to fail)
r? `@ghost`
`@rustbot` modify labels: rollup
The second suggestion shown here would previously incorrectly assume that the span corresponding to `⩵` was 2 bytes wide composed by 2 1 byte wide chars, so a span pointing at `==` could point only at one of the `=` to remove it. Instead, we now replace the whole thing (as we should have the whole time):
```
error: unknown start of token: \u{2a75}
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: Unicode character '⩵' (Two Consecutive Equals Signs) looks like '==' (Double Equals Sign), but it is not
|
LL | const A: usize == 2;
| ~~
error: unexpected `==`
--> $DIR/unicode-double-equals-recovery.rs:1:16
|
LL | const A: usize ⩵ 2;
| ^
|
help: try using `=` instead
|
LL | const A: usize = 2;
| ~
```
Update extern linking documentation
In particular, remove the note saying cdylibs can't link against dylibs — that hasn't been true for over four years.
* 2019-11-07: note is written: b54e8ecc2e
* 2020-01-23: restriction is lifted (without updating docs): 72aaa3a414
Use Option's discriminant as its size hint
I was looking at this in MIR after a question on discord, and noticed that it ends up with a switch in MIR (<https://rust.godbolt.org/z/3q4cYnnb3>), which it doesn't need because (as `Option::as_slice` uses) the discriminant is already the length.
make pub_use_of_private_extern_crate show up in cargo's future breakage reports
This has been a lint for many years.
However, turns out that outright removing it right now would lead to [tons of crater regressions](https://github.com/rust-lang/rust/pull/127656#issuecomment-2233288534) due to crates depending on an ancient version of `bitflags`. So for now this PR just makes this future-compat lint show up in cargo's reports, so people are warned when they use a dependency that is affected by this.
r? `@petrochenkov`
Use ThreadId instead of TLS-address in `ReentrantLock`
Fixes#123458
`ReentrantLock` currently uses the address of a thread local variable as an ID that's unique across all currently running threads. This can lead to uninituitive behavior as in #123458 if TLS blocks get reused. This PR changes `ReentrantLock` to instead use the `ThreadId` provided by `std` as the unique ID. `ThreadId` guarantees uniqueness across the lifetime of the whole process, so we don't need to worry about reusing IDs of terminated threads. The main appeal of this PR is thus the possibility of changing the `ReentrantLock` API to guarantee that if a thread leaks a lock guard, no other thread may ever acquire that lock again.
This does entail some complications:
- previously, the only way to retrieve the current thread ID would've been using `thread::current().id()` which creates a temporary `Arc` and which isn't available in TLS destructors. As part of this PR, the thread ID instead gets cached in its own thread local, as suggested [here](https://github.com/rust-lang/rust/issues/123458#issuecomment-2038207704).
- `ThreadId` is always 64-bit whereas the current implementation uses a usize-sized ID. Since this ID needs to be updated atomically, we can't simply use a single atomic variable on 32 bit platforms. Instead, we fall back to using a (sound) seqlock on 32-bit platforms, which works because only one thread at a time can write to the ID. This seqlock is technically susceptible to the ABA problem, but the attack vector to create actual unsoundness has to be very specific:
- You would need to be able to lock+unlock the lock exactly 2^31 times (or a multiple thereof) while a thread trying to lock it sleeps
- The sleeping thread would have to suspend after reading one half of the thread id but before reading the other half
- The teared result from combining the halves of the thread ID would have to exactly line up with the sleeping thread's ID
The risk of this occurring seems slim enough to be acceptable to me, but correct me if I'm wrong. This also means that the size of the lock increases by 8 bytes on 32-bit platforms, but this also shouldn't be an issue.
Performance wise, I did some crude testing of the only case where this could lead to real slowdowns, which is the case of locking a `ReentrantLock` that's already locked by the current thread. On both aarch64 and x86-64, there is (expectedly) pretty much no performance hit. I didn't have any 32-bit platforms to test the seqlock performance on, so I did the next best thing and just forced the 64-bit platforms to use the seqlock implementation. There, the performance degraded by ~1-2ns/(lock+unlock) on x86-64 and ~6-8ns/(lock+unlock) on aarch64, which is measurable but seems acceptable to me seeing as 32-bit platforms should be a small minority anyways.
cc `@joboet` `@RalfJung` `@CAD97`
This changes `ReentrantLock` to use `ThreadId` for the thread ownership check instead of the address of a thread local. Unlike TLS blocks, `ThreadId` is guaranteed to be unique across the lifetime of the process, so if any thread ever terminates while holding a `ReentrantLockGuard`, no other thread may ever acquire that lock again.
On platforms with 64-bit atomics, this is a very simple change. On other platforms, the approach used is slightly more involved, as explained in the module comment.
This also adds a `CURRENT_ID` thread local in addition to the already existing `CURRENT`. This allows us to access the current `ThreadId` without the relatively heavy machinery used by `thread::current().id()`.
Fix ambiguous cases of multiple & in elided self lifetimes
This change proposes simpler rules to identify the lifetime on `self` parameters which may be used to elide a return type lifetime.
## The old rules
(copied from [this comment](https://github.com/rust-lang/rust/pull/117967#discussion_r1420554242))
Most of the code can be found in [late.rs](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html) and acts on AST types. The function [resolve_fn_params](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2006), in the success case, returns a single lifetime which can be used to elide the lifetime of return types.
Here's how:
* If the first parameter is called self then we search that parameter using "`self` search rules", below
* If no unique applicable lifetime was found, search all other parameters using "regular parameter search rules", below
(In practice the code does extra work to assemble good diagnostic information, so it's not quite laid out like the above.)
### `self` search rules
This is primarily handled in [find_lifetime_for_self](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2118) , and is described slightly [here](https://github.com/rust-lang/rust/issues/117715#issuecomment-1813115477) already. The code:
1. Recursively walks the type of the `self` parameter (there's some complexity about resolving various special cases, but it's essentially just walking the type as far as I can see)
2. Each time we find a reference anywhere in the type, if the **direct** referent is `Self` (either spelled `Self` or by some alias resolution which I don't fully understand), then we'll add that to a set of candidate lifetimes
3. If there's exactly one such unique lifetime candidate found, we return this lifetime.
### Regular parameter search rules
1. Find all the lifetimes in each parameter, including implicit, explicit etc.
2. If there's exactly one parameter containing lifetimes, and if that parameter contains exactly one (unique) lifetime, *and if we didn't find a `self` lifetime parameter already*, we'll return this lifetime.
## The new rules
There are no changes to the "regular parameter search rules" or to the overall flow, only to the `self` search rules which are now:
1. Recursively walks the type of the `self` parameter, searching for lifetimes of reference types whose referent **contains** `Self`.[^1]
2. Keep a record of:
* Whether 0, 1 or n unique lifetimes are found on references encountered during the walk
4. If no lifetime was found, we don't return a lifetime. (This means other parameters' lifetimes may be used for return type lifetime elision).
5. If there's one lifetime found, we return the lifetime.
6. If multiple lifetimes were found, we abort elision entirely (other parameters' lifetimes won't be used).
[^1]: this prevents us from considering lifetimes from inside of the self-type
## Examples that were accepted before and will now be rejected
```rust
fn a(self: &Box<&Self>) -> &u32
fn b(self: &Pin<&mut Self>) -> &String
fn c(self: &mut &Self) -> Option<&Self>
fn d(self: &mut &Box<Self>, arg: &usize) -> &usize // previously used the lt from arg
```
### Examples that change the elided lifetime
```rust
fn e(self: &mut Box<Self>, arg: &usize) -> &usize
// ^ new ^ previous
```
## Examples that were rejected before and will now be accepted
```rust
fn f(self: &Box<Self>) -> &u32
```
---
*edit: old PR description:*
```rust
struct Concrete(u32);
impl Concrete {
fn m(self: &Box<Self>) -> &u32 {
&self.0
}
}
```
resulted in a confusing error.
```rust
impl Concrete {
fn n(self: &Box<&Self>) -> &u32 {
&self.0
}
}
```
resulted in no error or warning, despite apparent ambiguity over the elided lifetime.
Fixes https://github.com/rust-lang/rust/issues/117715
